|
Product Details:
|
|
| Place of Origin: | China |
|---|---|
| Brand Name: | JingSu ShengMan |
| Certification: | CE and ISO9001 |
| Model Number: | ct-c |
|
Payment & Shipping Terms:
|
|
| Minimum Order Quantity: | 1set |
| Price: | USD20000-USD300000 |
| Packaging Details: | Plywood Cases |
| Delivery Time: | 60-90days |
| Payment Terms: | L/C, T/T |
| Supply Ability: | 10sets |
|
Detail Information |
|||
| Condition: | New | Warranty: | 1 Year |
|---|---|---|---|
| Heating Source: | Electricity, Steam, Or Both | Application: | Chemical |
| Material: | SUS304 | Voltage: | 220v/380v |
| Drying Capacity: | 35-480kg | Power Of Fan: | 0.45-1.8kw |
| Drying Trolly: | 2-8 Sets | Baking Trays: | 16-192 |
| High Light: | 380v Pharmaceutical Drying Oven,220v Pharmaceutical Drying Oven,380v Pharmaceutical Drying machine |
||
Product Description
Large capacity China brand medical drying cabinet for medicine raw material with any special requirements
Introduction
Most hot air is circulated in the oven. The Heat efficiency is high and the energy is saved. By using the forced ventilation function, there are adjustable air distribution plates inside the oven. The materials can be dried uniformly. The heating source might be steam, hot water, electricity and far infrared. With a widely selection. The whole machine is low in the noise. The operation is in balance. The temperature is controlled automatically. The installation and maintenance are easy. The application is wide. The machine can be used for drying various materials and is general drying equipment.
Feature:
1. The heat source can be steam, electricity, far infrared, or steam+electricity. Customer can select one of the heating ways in accordance with practical conditions;
2.The temperature of operation: 50 ~ 140 °C for steam, Maximum temperature will be 150 °C;
3.50 ~ 350 °C for electricity or far infrared;
4. There are automatic and computer control systems for customer selection;
5. The normal pressure of steam will be 0.02-0.8MPa (0.2-8kg/cm 2);
6. The equipped power of electric heater will be 15kw Calculated with Model I and the operational power to be used will be 5-8kw/hr;
7. for special requirement, please indicate it in order;
8. The price of non-standard oven shall be discussed additionally;
9. If the operation temperature is more than 140 °C or less than 60 °C, please indicate it in order;
10. The size of drying trolley and tray is standardized. They can be exchanged each other;
Technical parameters
| type | batch drying capacity (kg) | power of fan | steam to be consumed (kg/h) | drying trolly (set) | baking trays | overall dimension mm |
| GMP-0 | 35 | 0.45 | 8 | / | 16 | 1130*1100*1750 |
| GMP-I | 120 | 0.45 | 18 | 2 | 48 | 2300*1200*2000 |
| GMP-II | 240 | 0.9 | 36 | 4 | 96 | 2300*2200*2000 |
| GMP-III | 360 | 1.35 | 54 | 6 | 144 | 3430*2200*2000 |
| GMP-IV | 480 | 1.8 | 72 | 8 | 192 | 4460*2200*2290 |
Note: The above data is for reference only. If having special requirements, the factory can provide the service of consultation and design.
APPLICATION
The drying oven is suitable for drying and dehydration of material and product for pharmaceutical, chemical, food, agricultural, aquatic, light industry, heavy industry; such as medicine raw material, medicine, Chinese herbal medicine, extractum, granules, powder, pill, packing bottle, pigment and dyes, dehydrated vegetables, dried fruit, sausages, plastic, resin, electric elements, varnish, and etc.
Pre-service:
As a good and rich experience supplier, we should offer customer the best quality and best price of the machine.
1. Introduce the suitable product to the customer in detail, answer the question raised by customer carefully.
2. Make the suitabe project as the customer requirement and make sure the machine is suitable for the material.
Sale service:
(1). Ensure product with high quality and pre-commissioning before delivery. (2). Delivery on time. (3). Provide full set of documents as customer’s requirements.
After-sale service:
Provide considerate services to minimize clients’ worries.
1. Assist clients to prepare for the first construction scheme.
2. Install and debug the equipment.
3. Train the first-line operators.
4. Examine the equipment.
5. Take initiative to eliminate the troubles rapidly.
6. Provide technical support.
7. Establish long-term and friendly relationship.
Service commitment:
1. Provide clients one-year warranty to make sure the machine work well.
2. We always keep certain inventory level of spare parts, which means the replacements can be sent to you timely.
3. Send every client a preferential quotation.
Enter Your Message
| Jiangsu Shengman Drying Equipment Engineering Co., Ltd |
| zhenglu town, tianning district, changzhou city, JIangsu Province |
| lillian@spraydryingmachine.com |
